Traditionally, utility pipes were exposed by manual digging, and that was often a less precise job, which involved many risks. Fortunately, hydrovac excavation trucks can make the process easier, safer and more accurate. And the process of exposing utility pipes is called daylighting or potholing. Excavators specializing in this technology use a balanced combination of water pressure, air, and sometimes heat to break up the ground and suck up the soil around the underground pipes. Because industrial strength vacuum and pressurized water work together, they can thus easily excavate and remove soil, saving both money and time. Daylighting is very efficient and non-destructive, and that is why many people choose this tremendous innovation. At the same time, as it can be done more rapidly, daylighting is the ideal technology to be used by those who need to travel and drive to work. A faster excavation also implies better productivity, and can be of great help to companies and individual...

Potholing refers to the procedure of employing hydro excavation in order to locate and expose underground cables, pipes, utilities, etc. This technology implies mixing a high-speed vacuum with high pressure water equipment. It stands for a very safe and efficient excavation technique. Thus, potholing services Florida offers helps you save a lot of time and money , as compared to the classical excavation procedures. We should mention here the fact that with the traditional excavation technology, excavators make guesses about the location of underground elements such as pipes or utilities. This can be dangerous for the whole infrastructure, and also for the environment. Potholing, on the other hand, is both safe and precise. High pressure water is paired with the use of several different nozzles. All of these allow excavators to dig holes of different sizes and shapes, making soil removal a safe and simple process. Traditional excavating may lead to damages which are harder to repai...

Excavating in the cold season may be quite a challenge. But with the right type of technology, it all becomes very simple. It may often happen for contractors to avoid working in winter, due to the fact that there is a lot of snow, ice, and other weather-related obstacles that may prevent them from doing an easy, efficient job in a reasonable amount of time. In order to know how the whole thing can be dealt with, it is important to be familiar with the way in which freezing takes place. Thus, we should note here that just one day of cold does not mean that the soil will freeze. As a matter of fact, the outside temperature has to be on a constant downward spiral in order for the ground to become frozen. According to most vacuum excavation Florida specialists , high-pressure equipment can do wonders in terms of excavating even the most frozen ground. Because high-pressure technology is often used to cut through very tough materials such as concrete, high-pressure excavation certainly...

  Excavating with the power of water is a present-day technology that is ever growing in popularity, for some very good reasons. The Hydro excavation Florida services ensure the fact that the utilities remain intact during the excavation process. When the high-pressure water cuts through the soil, it can create a sort of slurry which is immediately removed by the vacuum part. Hydrovac stands for special equipment which uses water to cut through and also turn the soil into a more liquid form, which makes the excavation a lot easier and less dangerous for utility lines. There are several different types of hydrovacs available on the market. And these models can have different vacuum levels. Moreover, their vacuum capacities may also vary in power. The levels of water pressure can also vary greatly. This type of technology makes it possible to excavate in a wide range of soils and under different climate conditions. This includes frozen soil, clay, hard-packed dirt, and so on. ...